Hose Reel Irrigator
A classic mobile sprinkler system driven by high-efficiency water turbines, offering a water-saving rate of over 75% while significantly increasing crop yields. Engineered for simplicity and longevity, this series is the ideal choice for farmers who require a dependable, easy-to-operate system with a proven track record.
A specialized generation of hose reel irrigators developed by H.T-BAUER to address the needs of regional farming, fragmented land, and smaller agricultural plots. Inheriting the core drive technology of Austrian BAUER, the Aquago focuses on portability and cost-effectiveness, making it the perfect entry-level professional irrigation solution for farms that require frequent relocation or operate under lower water pressure.
Aquago Il
Best for: small/medium plots
Coverage: 1-8 ha/set
Inlet pressure: 0.25-0.75MPa
Value: low investment, easy transport
Aquajet II
Best for: medium-large plots
Coverage: 10-30 ha/set
Flow: 25-50 m3/h
Value: efficient turbine + intelligent control
Hose reel irrigator(Large)
Model: 65, 75, 85, 90
PE pipe diameter: 65-100mm
PE pipe length: 200-450m
Irrigation area: 6-26 ha
Flow: 11-65m3/H
Aquajet II updated with new high efficiency water turbine
Aquajet II Plus
Realize real uniform speed recovery, with precision up to ±1m/H, which extremely Improve irrigation uniformity. Additional water pump linkage and fault alarm
Human-computer interaction
Motor speed regulation
Solar charging
Aquago –light and small, can be manually towed
PE pipe diameter (mm) | 40 | 50 |
PE pipe length (m) | 120 | 90 |
Irrigation area (ha) | 2.5 | 6 |
Flow rate (m3/h) | 3-7 | 6-16 |
Aquago II—Option of high cost performance ratio
PE pipe diameter (mm) | 50 | 55 | 60 |
PE pipe length (m) | 180 | 170 | 110 |
Irrigation area (ha) | 10 | 9 | 7.5 |
Flow (m3/H) | 7-13 | 9-18 | 9-21 |
Fertigation
Visual touch screen operation, simple and convenient. Equipped with a towing trolley, the fertilization system can be moved to different project sites with the sprinkler.
Four-wheel water-spraying traveling crane
More stability and adaptability The height of the spray gun is adjustable, which is more suitable for high-stalk crops such as sugarcane and corn. Attachable Cantilever (85TX Series Only)
A two-wheeled vehicle | Four-wheel drive | |
Wheel track | 1.5-2.8m | 1.6-2.8m |
Wheelbase | / | 1.05m |
Height of spray gun above the ground | 1.1m | 1.5-3.3m |
Adapt to the terrain slope | 11° | 14° |
Cantilever height above the ground | 1m | 1.5m |
Walking stability | OK | Better |
Application
We're here to help you grow.
Cash Crops & Vegetables: Perfectly suited for precise water management of potatoes, sugar beets, and various open-field vegetables.
Small-Scale Cereals: Ideal for wheat and corn in regional plots or areas where large-scale pivots or linear systems cannot reach.
Orchards & Pastures: Its compact footprint allows it to navigate easily between rows in orchards or operate within small livestock grazing areas.
Fragmented Terrains: The ultimate solution for L-shaped, triangular, or irregular plots that are separated by roads, fences, or other obstacles.
Optional functions
Booster pump
Different types of booster pumps can be selected according to the requirements. Installed on the host, flexible and convenient.
ISG single stage vertical pipeline pump；Diesel engine water pump
High efficiency, energy saving, low noise, reliable performance and wide application range. Flow: match according to the reel demand (11-65m3/H) Lift: match according to the existing water source (50-80m)
Learn more about our products
Pivot irrigator | Centerliner and Linear irrigator | Hose reel irrigator | |
Applicable field | Large areas of farm and grassland | Medium-sized Strip and regular plot | Small-sized Strip and regular plot |
Length of System (m) | 120–740 | 120–1240 | 90–450 (PE Pipe) |
Irrigation area(ha) | 4.5–170 | 18-180 | 2.5—26 |
Flow(m3/h) | 20–450 | 50–600 | 3.3–65 |
Advantage | Good automation & Remote control Good Fertigation | Uniform Irrigation; spray fertilizer, pesticide | Flexible moving Easy to transfer in operations |
Disadvantage | Circular sprinkler Round irrigation Lack of corner coverage | Pre-constructions in large; Investment is larger | Work lanes shall be reserved |
Specification
Aquajet II
Key specs (typical range)·
Flow: 25-50 m3/h·
PE hose 0:65-110 mm
Hose length: 200-450 m
Coverage: 10-30 ha per set
TW20 turbine + digital communicator
- Speed & pressure display for retraction control
- 7-inch LCD for monitoring and parameter adjustment
- Designed for energy efficiency and stable performance
Sprinkler boom package (option)
- Structural steel boom; quick connectors (typical 26
m boom)
- Typical working width ~34 m; spacing ~35–50 m
(project-dependent)
Aquago II
Designed for small-to-medium irrigation needs
Three hose size options (50/55/60) for flexible selection.
Key specs (typical range)
- Flow: 10–18 m³/h
- PE hose Ø: 50–60 mm
- Hose length: 90–180 m
- Coverage: 1–10 ha per set
Machine drive- Full flow turbine
TX20 full-flow turbine is a specifically designed turbine with
large cross sections and minimum pressure loss. Therefore it
can reach high retraction speeds also at very low flow rate. It
features a highly flow-promoting design and is mounted directly
on the reel shaft. The turbine provides the energy needed
for PE-pipe retraction. Speed is taken directly off the impeller
shaft and transmitted over a two-stage (three-stage) V-belt
drive to the change-speed gearbox.
PTO Drive
If required, you can rewind the PE-pipe with the tractor and a
PTO shaft. Move the gear shift lever to zero position. A spring
presses the gear shift lever into the locking recess. In this
position the band brake is released. This gear shift lever
position serves also for PE-pipe pull-off.
Mechanical Control
The retraction speed is infinitely variable with the speed
regulating lever which is secured with the knurled nuts after
the setting. It remains next to constant from the first to the last
layer and on each individual layer. This is achieved by
readjustment of the turbine speed through the speed
compensation bar fitting closely on every PE-pipe layer during
the run
Tachometer
The retraction speed of Aquajet with mechanical speed regulation can be read from SPEEDOMET.ER
With this novel tachometer design you can read the sprinkler retraction speed comfortably from the large LCD
display. To show the retraction speed precisely in meters per hour on the display, use the keys of the keypad
to enter the gear at which the machine is currently running and the respective PE-pipe layer.
By means of measuring pulses, the precise retraction speed at the given operating data is computed in the
electronic box. Pick-up of measuring pulses is contact-less by magnet sensors on the gearbox input. The
machine data are stored permanently in the electronic box, therefore they only need to be entered once when
the device is installed. However, if required, these data can always be reprogrammed to fit other models.
Winding Mechanism
The winding mechanism operates synchronously with the
winding or unwinding of the PE-pipe. Starting from the reel it
is operated through a chain and the helically grooved spindle
transporting the winding carriage of the PE-pipe. The winding
mechanism ensures that the PE-pipe is properly guided
winding for winding. When you put the machine into operation
for the first time, pull off the full length of the PE-pipe to let it
take a circular shape under pressure. This step is essential for
trouble-free operation of the winding mechanism.
Shut-Off and Ssfety Equipment
Unattended performance of the Aquajet is made possible by a
final and safety shut-off. The final shut-off is actuated when
the sprinkler cart presses against the shut-off frame, which in
turn operates the gear shift lever through a system of rods.
This way the drive is stopped.
To avoid troubles caused by faulty windings of the PE-pipe on
the reel, shut-off is also activated by the shut-off frame when
faulty pipe windings build up on the reel.
Cart
High construction of both symmetric and asymmetric wheel
carts provides maximum crop protection (asymmetric wheel
cart OPTIONAL). With infinitely variable track width you can
adapt the carts to any crop row spacing. Easier pulling of the
cart is ensured by the drawing-out hook.
